CATÁLOGO DE PRODUCTOS

PRODUCTS CATALOGUE

Car wash
Carnauba wash & wax
Coolant long life Red/Green HD 50/50
Coolant Pre-Mix Red / Green
CV moly grease
DOT-3 DOT-4 brake fluid
Engine degreaser
EP grease extreme pressure
Flushing
Fuel injector cleaner
MP grease multi-purpose
Tire shine
Vinyl & plastic protectant
Windshield washer fluid

Car wash

Specially designed to clean car and truck bodies. Its balanced formula cleans deep without leaving stains or residues commonly associated with soaps and daily use detergent. product totally biodegradable.

Modo de uso Use mode
Avoid washing the vehicle under direct sunlight. Mix 30 ml of shampoo in a bowl of water. Rinse with plenty of water removing dust and grime that may scratch the vehicle paint. Impregnate the cloth or sponge with the solution.
Componentes principales Main components
Mixture of surfactants, sodium lauryl sulfate (sodium dodecyl sulfate), dyes and surfactants.

Almacenamiento Storage
Store the product in a cool and dry place, at room temperature between 5 and 48 ̊C and protected from direct sunlight. For more information on the handling, storage and disposal of the product.
Comprar
2 years Fecha de vencimiento Expiration Date
Presentación
Presentation
Thumbnail

Carnauba wash & wax

Specially designed to clean car and truck bodies. Its balanced formula cleans deep without leaving stains or residues commonly associated with soaps and daily use detergent. Contains carnauba wax.

Modo de uso Use mode
Avoid washing the vehicle in direct sunlight or with a hot body. Mix 30ml of shampoo in a bowl of water or adjust the amount depending on the desired level of foam. Rinse with plenty of water removing dust and dirt.
Componentes principales Main components
Mixture of surfactants, surfactants, thickeners, dyes, wax, preservatives and water.
Almacenamiento Storage
Store the product in a cool, dry place, at room temperature and protected from direct sunlight.
Comprar
2 years Fecha de vencimiento Expiration Date
Presentación
Presentation
Thumbnail

Coolant long life Red/Green HD 50/50

It is a high-tech product, especially recommended for the protection of vehicles’ refrigeration system, where the manufacturer's recommendations indicate the use of MEG high-content refrigerants.

Modo de uso Use mode
Use it directly and undiluted. In case of replacement, completely drain the used coolant from the radiator and auxiliary tank, as recommended by the vehicle’s manufacturer. Be sure to completely remove the oxide and the present sediment particles.
Componentes principales Main components
Treated water, mono ethylene glycol, corrosion and rust inhibitor additives, antifoams, and bactericides.
Almacenamiento Storage
Store the product in a cool, dry place, at room temperature and protected from direct sunlight.
Comprar Ficha del Producto
2 years Fecha de vencimiento Expiration Date
Presentación
Presentation
Thumbnail

Coolant Pre-Mix Red / Green

It is a high-tech product, especially recommended for the protection of the passengers vehicles’ refrigeration system feed by gasoline, where the manufacturer's recommendations indicate the use of MEG high-content refrigerants.

Modo de uso Use mode
Use it undiluted. Pour the contents of the container directly into the auxiliary tank or radiator of the cooling system to the indicated level.
Componentes principales Main components
Treated water, mono ethylene glycol, corrosion and rust inhibitor additives, antifoams, and bactericides.
Almacenamiento Storage
Store the product in a cool, dry place, room temperature and the protection of light direct from the sun.
Comprar Ficha del Producto
3 years Fecha de vencimiento Expiration Date
Presentación
Presentation
Thumbnail

CV moly grease

It is a grease of NLGI 1 consistency, made with high viscosity lubricant base, bentonite inorganic thickener, molybdenum disulphide (MoS2) and special additives. Its formula confers excellent properties to be applied.

Modo de uso Use mode
Clean the systems before greasing. Apply directly or through a grease fitting, depending on the circumstances.
Componentes principales Main components
Mixture of highly refined mineral bases, bentonite, molybdenum disulfide and anti-wear additives.
Almacenamiento Storage
Store the product in a cool, dry place, at room temperature and protected from direct sunlight. For more information on the handling, storage and disposal of the product.
Comprar
3 years Fecha de vencimiento Expiration Date
Presentación
Presentation
Thumbnail

DOT-3 DOT-4 brake fluid

It is a synthetic fluid made from polygols, ethers and additives, to protect the hydraulic systems of disc and drum brakes with or without anti-lock braking system (ABS) of all types of vehicles.

Modo de uso Use mode
Fill or replace the DOT-3 / DOT-4 fluid according to the vehicle manufacturer's recommendations.
Componentes principales Main components
Mixture of glycols, polyalkylene glycols, glycol ethers and inhibitory additives.
Almacenamiento Storage
Store the product in a cool, dry place, at room temperature and protected from direct sunlight.
Comprar Ficha del Producto
3 years Fecha de vencimiento Expiration Date
Presentación
Presentation
Thumbnail

Engine degreaser

It is designed to remove any traces of oil, grease, grime and dirt from the engine, which can cause excessive heat retention and inadequate operation of some of its components.

Modo de uso Use mode
Shake well before using. With the engine off and cold, spray the product on the dirty areas with grease, dirt or oil. Leave on for 15 minutes. If necessary, rub the dirtiest parts with a regular bristle brush.
Componentes principales Main components
Mixture of aliphatic hydrocarbons and soluble surfactants.
Almacenamiento Storage
Store the product in a cool, dry place, at room temperature and protected from direct sunlight.
Comprar
3 years Fecha de vencimiento Expiration Date
Presentación
Presentation
Thumbnail

EP grease extreme pressure

It is a grease of NLGI 2 consistency, elaborated with highly refined mineral bases, inorganic thickener type silica or bentonite and last generation extreme pressure (EP) additives. Specially designed to lubricate and protect mechanisms.

Modo de uso Use mode
It can be applied manually, with grease gun and even in automatic lubrication systems, to mechanisms exposed or not to high temperatures in which Extreme Pressure properties are required (subjected to loads).
Componentes principales Main components
Mixture of highly refined mineral bases, bentonite and antioxidant additives, antiwear, adhesion and inhibitors of corrosion, rust and extreme pressure.
Almacenamiento Storage
Store the product in a cool and dry place, at room temperature between 5 and 48 ̊C and protected from direct sunlight. For more information on the handling, storage and disposal of the product, it is recommended to consult the Sheet.
Comprar
3 years Fecha de vencimiento Expiration Date
Presentación
Presentation
Thumbnail

Flushing

Product formulated with special additives for cleaning all the internal parts of the engine where the lubricant flows. It can be applied in four-stroke engines, diesel or gasoline with direct or indirect injection systems.

Modo de uso Use mode
The internal cleaning of the motor must be done when the oil substitution corresponds
used of the vehicle. With the engine at normal operating temperature, turn off the engine and pour the contents of the container into the compartment.
Componentes principales Main components
Mixture of lubricating bases, detergents, antifriction agents, borate ester, solvents, aromatics and aliphatics.
Almacenamiento Storage
Store the product in a cool, dry place, at room temperature and protected from direct sunlight. For more information on the handling, storage and disposal of the product.
Comprar
3 years Fecha de vencimiento Expiration Date
Presentación
Presentation
Thumbnail

Fuel injector cleaner

Specially designed to clean and maintain the flow and spray channels of the injectors, thereby restoring or recovering the constant and uniform flow of fuel entering the combustion chamber.

Modo de uso Use mode
Add the complete contents of the container during the filling of the gas tank, thus allowing a correct mixing due to the turbulence generated by the process. The product can be used in tanks of up to 60 liters of fuel.
Componentes principales Main components
Mixture of aliphatic compounds obtained from the distillation of petroleum, mainly branched, glycol ether, corrosion inhibitors and detergent additives.

Almacenamiento Storage
Store the product in a cool, dry place, at room temperature and protected from direct sunlight. For more information on the handling, storage and disposal of the product.
Comprar
3 years Fecha de vencimiento Expiration Date
Presentación
Presentation
Thumbnail

MP grease multi-purpose

NLGI 2 multi-purpose grease, made with highly refined mineral bases, inorganic thickener silica gel or bentonite and additives that confer properties of corrosion inhibition, resistance to washing by water.

Modo de uso Use mode
It can be applied manually, with grease gun and even in automatic lubrication systems, to mechanisms exposed or not to high temperatures among which can be mentioned: low and medium speed flat antifriction bearings.
Componentes principales Main components
Mixture of highly refined mineral bases, bentonite, antioxidant additives, antiwear, adhesion and inhibitors of corrosion and rust.
Almacenamiento Storage
Store the product in a cool and dry place, at room temperature between 5 and 48 ̊C and protected from direct sunlight.
Comprar
3 years Fecha de vencimiento Expiration Date
Presentación
Presentation
Thumbnail

Tire shine

Product specially formulated to provide shine to the tires of all types of vehicles. Does not contain acid, caustic or abrasive substances. It polishes and keeps the lustrous appearance in a single application.

Modo de uso Use mode
Apply by means of the manual sprinkler on the surface in sufficient quantity and distribute evenly with a brush or sponge over the entire side surface of the rims.
Componentes principales Main components
Mixture of petroleum distillates, polydimethylsiloxane, butyl glycol dimethyl ether and dyes.
Almacenamiento Storage
Store the product in a cool and dry place, at room temperature between 5 and 48 ̊C and protected from direct sunlight.
Comprar
3 years Fecha de vencimiento Expiration Date
Presentación
Presentation
Thumbnail

Vinyl & plastic protectant

It is a silicone-based product that prevents deterioration of the interior surface of cars, trucks and boats, caused by the inclement weather. Protects and beautifies all types of vinyl surface, leather, rubber and plastics.

Modo de uso Use mode
Wipe off excess dirt on the surface to be treated. Shake the product before use. Spray enough product on a clean, dry cloth.
Componentes principales Main components
Mix of polydimethylsiloxane, water, preservatives and additives.
Almacenamiento Storage
Store the product in a cool, dry place, at room temperature and protected from direct sunlight.
Comprar
2 years Fecha de vencimiento Expiration Date
Presentación
Presentation
Thumbnail

Windshield washer fluid

Product designed to keep the windshield surface clean and in perfect visibility conditions. It is made with surfactants and special additives that effectively remove dirt, grease, dust and insect residues.

Modo de uso Use mode
Add the contents of the container directly to the container intended for the windscreen wiper fluid of the car. To get the most benefit from its formulation, do not mix it with any other product.
Componentes principales Main components
Isopropyl alcohol, butyl oxitol and anionic surfactants. It does not contain ammonia.
Almacenamiento Storage
Store the product in a cool, dry place, at room temperature and protected from direct sunlight.
Comprar
2 years Fecha de vencimiento Expiration Date
Presentación
Presentation
Thumbnail